Great to see you here. Join our insightful photographic forum today and start tapping into a huge wealth of photographic knowledge. Completing our simple registration process will allow you to gain access to exclusive content, add your own topics and posts, share your work and connect with other members through your own private inbox! And don’t forget to say hi!
Thank You for your help,After resetting the back and camera, does the capture error continue---or work normally? Was the capture error after completing the most recent firmware updates?
If so, there might have been an error when the firmware was updating. Try downloading and updating the firmware again.
ken
Have you contacted your dealer or Phase One?Thank You for your help,
I did try it with different lenses and different cards,I did an new firmware upgrade for the back and the camera, after that it tooks 50 frames to get the capture error again.
???
I do need it in 10 hours......
It started 4-5 days ago with one or two failures a day.Have you contacted your dealer or Phase One?
Does it happen both tethered and untethered? If only untethered does it happen with multiple cf cards *listed by phase one as tested/supported* and formatted in camera before use?
How are you doing the firmware updates? When you redid the firmware update did you re-download the firmware or did you use the same file from the first time (which might have been corrupted during download). Do they show any errors during he update?
When did the problem begin? Was it present upon delivery or only manifested after a firmware update. If the later then I would try reinstalling the body firmware a third time; it's unlikely to fail the first time, and very unlikely to fail twice in a row but anything is possible.
We're glad it worked out for you!It started 4-5 days ago...
OK I did all you said... works fine now.
...
Thanks to all of you for the help.