D
Diamond Star Halo
Guest
My images consistently print to within 1/8” on the top, bottom and right side, but ¼” on the LEFT side.
So the image appears off center – shifted slightly to the right side.
The Epson 3880 “Print” menu shows a preview of the image as it will be printed. On the preview, all the sides are even except on the RIGHT side, which has a small gap – interesting that it’s on the right side given that my problem is with the left side of the print.
I’ve tried the following settings on the Epson 3880 “Print” menu and, each time, the image prints the same way – off center, shifted slightly to the right side:
> Went to the “Position” section and checked the “Center Image” box.
> Went to the “Scaled Print Size” section and checked the “Scale to Fit Media” box.
> Went to both sections and checked both the “Center Image” and the “Scale to Fit Media” boxes.
> Went to the “Position” section and manually entered random numbers into the “Left” box until the preview showed that the image was centered.
The last time I called Epson for help on a different issue, the tech person did not read my Incident Report email carefully, kept cutting me off as I tried to explain the issue and noted that the problem was my use of Harman paper (although Epson doesn’t make 17x25 paper).
But my posts here yielded many kind and informative tips that solved the problem.
So, again, I would be grateful for any suggestions on how I can center my image.
Thanks everyone.
So the image appears off center – shifted slightly to the right side.
The Epson 3880 “Print” menu shows a preview of the image as it will be printed. On the preview, all the sides are even except on the RIGHT side, which has a small gap – interesting that it’s on the right side given that my problem is with the left side of the print.
I’ve tried the following settings on the Epson 3880 “Print” menu and, each time, the image prints the same way – off center, shifted slightly to the right side:
> Went to the “Position” section and checked the “Center Image” box.
> Went to the “Scaled Print Size” section and checked the “Scale to Fit Media” box.
> Went to both sections and checked both the “Center Image” and the “Scale to Fit Media” boxes.
> Went to the “Position” section and manually entered random numbers into the “Left” box until the preview showed that the image was centered.
The last time I called Epson for help on a different issue, the tech person did not read my Incident Report email carefully, kept cutting me off as I tried to explain the issue and noted that the problem was my use of Harman paper (although Epson doesn’t make 17x25 paper).
But my posts here yielded many kind and informative tips that solved the problem.
So, again, I would be grateful for any suggestions on how I can center my image.
Thanks everyone.