Will new Luminar 4 convert Fuji RAF raw files?

[gurtch]

I also posted this on the Processing Images board:

I am an 82 year old amateur. My more recent work was done with a Sony A7R II. I used mostly DXO to convert raw images and apply lens corrections. In December, I acquired a Fuji GFX 50R with 3 lenses. I make big prints (20"x30" with Sony, and 24"x32" with the Fuji). I often put different skies into different foregrounds, so the Luminar 4 advertisements say you can do this easily, negating a lot of masking, etc, etc). I have Photoshop CS 6 which will not open or process Fuji files. My present work flow for Fugi RAF files is slow and cumbersome: Down load the day's shoot to my PC. Batch Convert in DNG converter. Delete the RAF files to save space, bring the batch processed DNGs into Bridge, select the ones I want to work on. Open Photoshop, and using their Camera Raw, process them (it automatically applies "cooked in" Fuji lens corrections). I then finish retouching etc in Photoshop, and print from Photoshop. I am wondering if Luminar 4 will directly process RAF files, and simplify my work flow, by eliminating the DNG conversion. Will it also allow ACR type corrections during the conversions, such as levels, curves, saturation? Thanks in advance.
Dave G in NJ
MODERN PICTORIALS

 

[PedroL]

I also posted this on the Processing Images board:

I am an 82 year old amateur. My more recent work was done with a Sony A7R II. I used mostly DXO to convert raw images and apply lens corrections. In December, I acquired a Fuji GFX 50R with 3 lenses. I make big prints (20"x30" with Sony, and 24"x32" with the Fuji). I often put different skies into different foregrounds, so the Luminar 4 advertisements say you can do this easily, negating a lot of masking, etc, etc). I have Photoshop CS 6 which will not open or process Fuji files. My present work flow for Fugi RAF files is slow and cumbersome: Down load the day's shoot to my PC. Batch Convert in DNG converter. Delete the RAF files to save space, bring the batch processed DNGs into Bridge, select the ones I want to work on. Open Photoshop, and using their Camera Raw, process them (it automatically applies "cooked in" Fuji lens corrections). I then finish retouching etc in Photoshop, and print from Photoshop. I am wondering if Luminar 4 will directly process RAF files, and simplify my work flow, by eliminating the DNG conversion. Will it also allow ACR type corrections during the conversions, such as levels, curves, saturation? Thanks in advance.
Dave G in NJ
MODERN PICTORIALS

I would get subscription to PS, you would have very powerful tool to work with. ACR will/should work well with all Fuji raw files. IMHO - if anything like "H" exist in my opinion:ROTFL: - you are still in Model T Ford (CS6) which will not keep up with any newer auto.
Try it, you will like it....