tom in mpls
Active member
Very embarrassing situation. I bought a used Rotatrim M24 some time back at a very good price. Never having needed it until now, I find that I can't figure out how to get the cutting head to move from the left side, where it is locked into place, over to the right side for use.
Please help.
Feel free to poke fun at me.
Edit: Never mind. I found the problem. The head of the tiny screw that holds down the left side of the plastic guide has raised up a tiny bit; the housing of the cutting blade strikes the edge of the screw and is prevented from moving further. I'll figure out some way to get the screw flattened or removed.
Second edit: It works perfectly now.
Please help.
Feel free to poke fun at me.
Edit: Never mind. I found the problem. The head of the tiny screw that holds down the left side of the plastic guide has raised up a tiny bit; the housing of the cutting blade strikes the edge of the screw and is prevented from moving further. I'll figure out some way to get the screw flattened or removed.
Second edit: It works perfectly now.
Last edited: