I've been printing borderless images on Ilford Smooth Pearl using a Canon ipF6100 and then hot laminating the prints in an Akiles 18.5 inch pouch laminator. I've tried both matte and high gloss 5 mil laminating pouches and prefer the gloss where lighting can be controlled and there are no window reflections. Matte is also OK where reflections are a problem, but it doesn't give the kick to the images the gloss laminate provides. The laminated prints can be easily displayed and changed using SnapFrames that can be hung or permanently attached to the wall with screws. Frames are available in a wide selection of sizes, finishes, and profiles. I'm using 18x24 inch black frames with a 1.25 inch profile for my laminated prints with no glazing. Frame backing is opaque white styrene. Nice system if you print a lot and want to change your wall display prints often. The aluminum frames have stainless steel springs that allow you to easily pop open the frames mounted on the wall, change the print, and snap down the spring loaded moulding to hold the print in place.