Checking actuations on H1. Or H2 systems

[emendoz1]

Hello all, does anyone know how to check for actuations on the H1 or 2 bodies and lens? Is it only achieved by connecting a digital back or can it be done in camera settings?

Thanks

 

[jmosier01]

If you go into menu options and select system status then click next you'll see both the camera and lens actuations. Hth

 

[Udo]

Hi Emendoz,

try this:

1) Press the MENU button on the grip.
2) Turn the front control wheel until you reach menu 4 (Settings).
3) Press the Enter (DRIVE) button on the grip.
4) Turn the front control wheel again until you reach 4.4 (Info).
5) Press the Enter (DRIVE) button.
6) Press the Enter (DRIVE) button. The display now shows a
list of camera components and to the right of each individual
component a figure that represents the number of actions
taken by that component.
7) Press the Next (DRIVE) button to display the software version
for each camera body, etc.

Good luck.

Best regards,
Udo

 

[emendoz1]

Thanks guys. I haven't checked here in a few days.

Ed