Site Sponsors
Results 1 to 4 of 4

Thread: Checking actuations on H1. Or H2 systems

  1. #1
    Member
    Join Date
    Oct 2010
    Location
    LA and Gainesville, Fl
    Posts
    25
    Post Thanks / Like

    Checking actuations on H1. Or H2 systems

    Hello all, does anyone know how to check for actuations on the H1 or 2 bodies and lens? Is it only achieved by connecting a digital back or can it be done in camera settings?

    Thanks

  2. #2
    Member
    Join Date
    Dec 2011
    Location
    New York City
    Posts
    63
    Post Thanks / Like

    Re: Checking actuations on H1. Or H2 systems

    If you go into menu options and select system status then click next you'll see both the camera and lens actuations. Hth

  3. #3
    Member
    Join Date
    Jan 2009
    Location
    Jeddah / Saudi Arabia
    Posts
    126
    Post Thanks / Like

    Re: Checking actuations on H1. Or H2 systems

    Hi Emendoz,

    try this:

    1) Press the MENU button on the grip.
    2) Turn the front control wheel until you reach menu 4 (Settings).
    3) Press the Enter (DRIVE) button on the grip.
    4) Turn the front control wheel again until you reach 4.4 (Info).
    5) Press the Enter (DRIVE) button.
    6) Press the Enter (DRIVE) button. The display now shows a
    list of camera components and to the right of each individual
    component a figure that represents the number of actions
    taken by that component.
    7) Press the Next (DRIVE) button to display the software version
    for each camera body, etc.

    Good luck.

    Best regards,
    Udo

  4. #4
    Member
    Join Date
    Oct 2010
    Location
    LA and Gainesville, Fl
    Posts
    25
    Post Thanks / Like

    Re: Checking actuations on H1. Or H2 systems

    Thanks guys. I haven't checked here in a few days.

    Ed

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •