GrahamWelland
Subscriber & Workshop Member
Here's a prediction. If John had an Arca mount lens board, he'd be able to engineer what you're after
Great to see you here. Join our insightful photographic forum today and start tapping into a huge wealth of photographic knowledge. Completing our simple registration process will allow you to gain access to exclusive content, add your own topics and posts, share your work and connect with other members through your own private inbox! And don’t forget to say hi!
Ah, but then I'd be turning off this thread tooHere's a prediction. If John had an Arca mount lens board, he'd be able to engineer what you're after
:thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:almost there...this is the fully machined prototype; needs black anodizing, that will happen next week as i am off traveling for a bit.
shown is a Rodie 28mm, combo WRS mount fitted to an Actus using my mount. will focus to infinity and has full movements.
I couldn't have said it better!:thumbup::thumbup:
:thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:
here is the finished combo mounted lens adapter, with the 28mm rodie
i am making these adapters available on my site:
JLM Milich Specialized Camera Parts
here is the finished combo mounted lens adapter, with the 28mm rodie
i am making these adapters available on my site:
JLM Milich Specialized Camera Parts
Make sure to bring your adapters along to Capture Integration in Lake Tahoe next month. Dave Gallagher needs to see them.here is the finished combo mounted lens adapter, with the 28mm rodie
i am making these adapters available on my site:
JLM Milich Specialized Camera Parts