I have three very old manual focus Nikkors: the 28mm f3.5, 50mm f2 and 135mm f2.8. I just had them retrofitted for AI. I input all three into the D800, and told the camera focal lengths and maximum aperture. Test shots looked at in Bridge DOES correctly show shutter speed and f stop used, and correct focal length. But the data also says:
Lens 0.0mm f0.0
Max aperature: f1.0
Shouldn't the data show the max aperature I input to the camera? I am guessing the 0.0mm f0.0 is because this may be the field where a zoom lens would have the actual focal length listed.
No big deal, but I am concerned I may be doing something wrong.
Thanks in advance
Dave in NJ
BTW: looking at "Actual Pixels", it seems the 50mm f2 is the best of the lot!
Lens 0.0mm f0.0
Max aperature: f1.0
Shouldn't the data show the max aperature I input to the camera? I am guessing the 0.0mm f0.0 is because this may be the field where a zoom lens would have the actual focal length listed.
No big deal, but I am concerned I may be doing something wrong.
Thanks in advance
Dave in NJ
BTW: looking at "Actual Pixels", it seems the 50mm f2 is the best of the lot!