So I rented a D800E for a shoot a few days ago and had a rough start, first C1 does not tether without some driver work arounds which I eventually got to work but not till after my shoot. Second issue I had was with LCC generation, which depending if you were trying to correct for color-cast or light falloff showed problems in the far right part of the image. For color cast I would get a blue/green band, if you checked "light falloff" I would get a blown out band of white gradient in same position. Two different lenses were used along with generating the LCC from the latest versions of C1 on both the Mac and PC. Later my D800 (non-E) arrived and I did a quick test with it too and had the same results.
My LCC technique is sound, and my trusty 6x6in. opaque plexi is the same others use here from Taps plastic (it has worked without issues with my older cameras).
Has anyone else had this issue?
My LCC technique is sound, and my trusty 6x6in. opaque plexi is the same others use here from Taps plastic (it has worked without issues with my older cameras).
Has anyone else had this issue?