So have been playing around with the Hcam Master and it has taken me a little while to get used to it but I think I am finally getting it... Am not particularly technical so probably took a bit longer than required
Daf,
I did have one question and that was mainly directed to something you posted in a previous post...
You state;
"but you can also make a 2 row(2x2images) free paralax stich by using the 22/45/67 degree position, and just translate from leftdown to highright, then rotate the adpater and shoot again leftup and translate to rightdown, very quickly for a larger image..."
Can you please further explain this please?
I have had success doing a straightforward 2x stitch in portrait orientation (giving the rough equivalent of a landscape 33mm x 44mm area) but am really looking to do a bigger one if possible..
When referencing stitching with the Pentax 67 55mm, you state that with a "ratio 4/3 end up to around 45x57mm".
This is what I am after, a bigger stitched area
So have tried a few variations of your description but nothing seems to give a clean stitch unfortunately...
Are you placing the camera in portrait or landscape orientation?
Stefan, if you could also please chime in to how this stitch is being done it would be greatly appreciated!
Thanks!