My update process gets as far as this:
LM-EA7
Firmware for LM-EA7 Ver3.0.0 20160626 √
Read file success
Discovering adapter LM-EA7 ......
Found 1 adapter LM-EA7
Connecting adapter LM-EA7 ......
Connect adapter LM-EA7 success
Discovering service for updata......
I have waited far longer then 10 minutes. Nothing.
My lens is still at Ver.02.
What am I missing? TIA
UPDATE
Now I get in the lower left corner of the screen running numbers, counting down.
In the lower right corner rssi: -90db. <- Those db numbers fluctuate between -84 and -92.
SUCCESS! looks like this:
LM-EA7
Firmware for LM-EA7 Ver3.0.0 20160626 √
Read file success
Discovering adapter LM-EA7 ......
Found 1 adapter LM-EA7
Connecting adapter LM-EA7 ......
Connect adapter LM-EA7 success
Discovering service for updata (sic!)......
Discover service success
Discover characteristics success
Writing firmware data to adapter LM-EA7, please wait......
Write data success
Verify data success
Install firmware into adatper (sic!) LM-EA7
Adapter LM-EA7 firmware updata (sic!) success!
0>>0 rssi: -88...
I checked the lens, it's now at Ver.03!
I wonder what caused the problems I encountered?
I hadn't used the adapter in a couple of weeks it seems.
Could the adapter internal battery have been to low to sustain the bluetooth connection to my iPad?
Or something was wrong at the server, Internet, etc.?
Now let's see whether this is an improvement over Ver.02 or not for my lenses.
BTW, during the update process I used an iPad3 and had a Meike battery grip attached to the A7r2.