Don Libby
Well-known member
Good news but for me not. The main problem at least for me is the huge mirror effect the SP2/3 presents when shooting a bright light. In an effort to reduce the glare I went to PerfectFitTech.com for a screen protector/glare reducer for my SP3. The good news first. IT WORKS. The screen reduces the glare by at least a factor of 50% in bright Arizona sunlight.
The terrible news at least for me is that due to the way it's manufactured it is very brittle. I keep a UAG proactive case on my SP3 for protection. I removed the case as it covers just a little of the screen and the Perfect Fit covers well everything. I had installed the screen protector and took it outside for a test spin and liked what I saw (no pun intended). Came back inside and proceeded to reinstall the UAG which can be difficult at times. Got everything to fit in two corners however due to the tight overlapping of the UAG the remaining corners slipped outside of the UAG and caused an air bubble. In attempting to get the screen protector inside the remaining corners I attempted to gently light the corner to slide the SP in and the protector cracked. This also happened to the other corner as well even sending a crack down the middle of the protector.
Bottom line is that the Perfect Fit as nice as it is and as much as it reduces glare simply doesn't work for me in as much as I want the UAG to remain protecting the SP. If you aren't using a UAG I'd recommend it. For me I just blew $69.95.
I'm willing to take donations
Don
Forgot to add that after cracking the screen protector I removed it thinking I might spring for another and just trim it a little. Took a very sharp pair of scissors to see if I could trim the edge. Instant cracking/glazing on the protector. Just save myself another $70.
The terrible news at least for me is that due to the way it's manufactured it is very brittle. I keep a UAG proactive case on my SP3 for protection. I removed the case as it covers just a little of the screen and the Perfect Fit covers well everything. I had installed the screen protector and took it outside for a test spin and liked what I saw (no pun intended). Came back inside and proceeded to reinstall the UAG which can be difficult at times. Got everything to fit in two corners however due to the tight overlapping of the UAG the remaining corners slipped outside of the UAG and caused an air bubble. In attempting to get the screen protector inside the remaining corners I attempted to gently light the corner to slide the SP in and the protector cracked. This also happened to the other corner as well even sending a crack down the middle of the protector.
Bottom line is that the Perfect Fit as nice as it is and as much as it reduces glare simply doesn't work for me in as much as I want the UAG to remain protecting the SP. If you aren't using a UAG I'd recommend it. For me I just blew $69.95.
I'm willing to take donations
Don
Forgot to add that after cracking the screen protector I removed it thinking I might spring for another and just trim it a little. Took a very sharp pair of scissors to see if I could trim the edge. Instant cracking/glazing on the protector. Just save myself another $70.