T
tetsrfun
Guest
Is there any way to graft a RRS Lever Action QR clamp onto this head that makes sense?
*******
I just pulled a RC4 plate out of my "junk" box. Securing an RRS QR lever clamp shouldn't be much of a problem. The transverse "slot" in the plate needs to be enlarged a bit for the 1/4" 20 screw. If you have a dual mount clamp then just screw in from the bottom of the RC4; if not then screw from the top with a 1/4" inch nut in the bottom of the RC4 plate. I guess another option would be to drill and tap the RC4 plate for the 1/4" 20 screw but the RC4 plate is cast Magnesium? and seems pretty soft.
If the 410 is a serious consideration for you then I would be happy to get out the tools and see what is the best option.
Steve
*******
I just pulled a RC4 plate out of my "junk" box. Securing an RRS QR lever clamp shouldn't be much of a problem. The transverse "slot" in the plate needs to be enlarged a bit for the 1/4" 20 screw. If you have a dual mount clamp then just screw in from the bottom of the RC4; if not then screw from the top with a 1/4" inch nut in the bottom of the RC4 plate. I guess another option would be to drill and tap the RC4 plate for the 1/4" 20 screw but the RC4 plate is cast Magnesium? and seems pretty soft.
If the 410 is a serious consideration for you then I would be happy to get out the tools and see what is the best option.
Steve