Godfrey
Well-known member
Great, Thank you! Just what I wanted to know. I should have everything in house other than the epoxy/crazy glue and rubber cement, and there's a crafts store right down the block.The parts supplied are a plastic ring, molded plastic aperture control "handle", and small peel off adhesive shims (8). You will need a small phillips screwdriver to remove the screws from the lens mount ( 2 sets), a pair of tweezers for handling and applying the shims, a pair of needle nose pliers, some crazy glue or epoxy, and some rubber cement. Directions he supplies are quite good and well illustrated. You will also have to cut off a plastic tab from the lens mount (utility knife, snips or a dremel cutter work).
The kit should be here today, the lens on Friday.