citizin

Hi, problem solved, opened H body, clamped the curtain, removed the curtain assy, turned back the two gears connected at curtain motor until both stop rotating, put back the curtain assy, removed the clamp.... made some tests, no more curtain stuck,closed the rear... the H6 returned operative ... thanks for inspiration !
Domenico.

Hi ,
I've got the 23:1 err, the aux shutter of my H6D body is not moving (perfectly stay in it's home position) with the white spot in the center of the frame,
the mirror go up, then the error is showed on the camera body lcd...
Do You think possible to make something to repair it ? the shutter is not showing any strange tensioning it's perfectly aligned... can you give me some hints ?
Best regards from Italy,

Hello - I see you have had success with revamping Hasselblad battery grips -

My name is Bruce MacNeil - I am in Toronto. Hoping to restart my H3D.

From that jpg, that looks bad. The one thin line I see would is likely a column error which could be resolved with a re-calibration. But that weirdness below looks more serious. This is with CF Card? How often does this happen? Does it always look like that? Does it happen with more than one CF Card?

It might be easier if you email me @[email protected]

Hi - You asked about sending me a file for a back that you have. Can you tell me which digital back it is please?

Thanks,
Steve Hendrix/CI