Bill Caulfeild-Browne
Well-known member
This morning I turned on my 645DF and IQ 180. The camera said "no DB", so I checked that the DB was on properly and that the battery was good. No help, so I took the back right off and noticed the FP shutter was open - as it should be when you remove the back - but it won't close again when I put the back on again.
I did all the obvious things - took off the lens and the back and removed all batteries. Then I reassembled with fresh batteries in both camera and back but to no avail. The FP shutter does not close as it should when the back is fitted.
I cleaned the contacts on the camera and the back. No help either.
Anyone have any hints? The camera firmware is right up to date and the back is brand new.
Bill
I did all the obvious things - took off the lens and the back and removed all batteries. Then I reassembled with fresh batteries in both camera and back but to no avail. The FP shutter does not close as it should when the back is fitted.
I cleaned the contacts on the camera and the back. No help either.
Anyone have any hints? The camera firmware is right up to date and the back is brand new.
Bill